| REVERSE WRAP ADVANTAGE |
 All Custom Angle Rod products feature the superior action and performance of the reverse wrap on all casting products. Custom Angle Rods did not invent the reverse wrap, we have perfected it. The Reverse wrap, sometimes referred to as the spiral wrap, Robert's wrap, acid wrap or Missouri wrap has been used by rod crafters for quite some time. The Reverse Wrap is the method of wrapping a rod by placing the majority of the guides on the bottom of the casting blank. It is believed to have been introduced around 1909. Normally, the first few guides are off set to one side of the blank. These eyes are referred to as stripper guides. They direct the line from the reel on top of the rod to the guides located on the bottom of the blank. Custom Angle Rods uses two stripper guides placed on the right side of the blank for right handed reels. (Note* Fisherman who use a left handed reel should choose the online option for lefties, or special order from your nearest dealer.) The remaining guides are set on the bottom of the rod blank. The tip is aligned with the ring down matching the guides. The advantageThe line on all conventional rods (rods with guides on top of the blank), under load will slip to either the right or left side of the blank at the bend. This forces the guides over to the side and results in torque at the reel and your wrist.
When a fish changes direction the fisherman instinctively reacts in the opposite direction. This forces the line to cross over the blank at the bend. This action produces heat and eventually the rod and/or line will fail at the point where the line contacts the blank.  The reverse wrap has the unique ability to transmit the energy and vibration with such an impact that there is no Question. You just got bit, SET THE HOOK!!! There are many inherent advantages to owning any Custom Angle Rod. Among these are: All double footed guides.
At Custom Angle Rods, we don’t cut corners; every guide from the reel seat to the tip is double footed adding quality, strength, and confidence to the tools you use on the water. Everything is Custom Fitted. You can feel the quality in a Custom Angle Rod, from the hand reamed corks to the perfect alignment of all of the rod’s components. Feel the difference. MADE IN THE USA Enough said. Finding the right rod for you!
|
